16. Insert the Right Control Wire (41) into the hole in
the right side of the Upright (4) and pull it upward
out of the top of the Upright.
Repeat this step for the Left Control
Wire (48).
17. Untie and discard the wire tie on the Main Wire
(110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110), to the Pulse
Wire (134), and to the Right and Left Control
Wires (41, 48).
Insert the excess wire into the Upright (4) or into
the Console (7).
18. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four #8 x 1/2"
Screws (124).
16
48
17
7
48
18
7
124
Avoid pinching
the wires
13
4
41
134
41
4
110
4
124