NordicTrack Smart Terrain 12.0 Elliptical Manual page 10

10. Tip: Avoid pinching the wires. Tighten an M8 x
16mm Screw (120) and an M8 x 25mm Washer
(98) into each end of the Pivot Axle (35) at the
same time.
11. Identify the Right Pedal (49) and the Right Pedal
Arm (58), which are marked with “"Right”" stickers,
and orient them as shown.
Attach the Right Pedal (49) to the Right Pedal
Arm (58) with four M6 x 10mm Screws (121).
Repeat this step for the Left Pedal (not
shown) and the Left Pedal Arm (not shown).
10
120
98
11
49
121
121
10
Avoid pinching
the wires
35
98
120
58