Table of Contents
Advertisement
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Set the language
Select your language, then press MENU/OK to
confirm.
» The language setting is saved.
Note
•
The language setting option is country dependent. If no
welcome message is displayed, it means the language
setting is preset for your country. Then you can set the
date and time.
To reset the language, see the following steps.
1
Select [Phone setup] > [Language], then
press MENU/OK to confirm.
2
Select a language, then press MENU/OK
to confirm.
» The setting is saved.
8
EN
Set the date and time
Tip
•
To set the date and time later, press REDIAL/C to skip
this setting.
1
Press MENU/OK.
2
Select [Phone setup] > [Date & time],
then press MENU/OK to confirm.
3
Press the numeric buttons to enter the
date, then press MENU/OK to confirm.
» The time setting menu is displayed on
the handset.
4
Press the numeric buttons to enter the
time.
•
If the time is in 12-hour format, press
/
to select [am] or [pm] (Country
dependent).
5
Press MENU/OK to confirm.
Register additional handsets
Register your handset to the base station
before use.
Auto registration
The extra handset of the same model can be
auto-registered. Place the unregistered handset
on the base station.
» The handset detects the base station
and registers automatically.
» Registration is complete in less
than two minutes. The base station
automatically assigns a handset number
to the handset.
Manual registration/Pairing
If auto registration fails, register your handset
manually to the base station.
Advertisement
Table of Contents
