Table of Contents
Advertisement
10 Phone settings
You can customize the settings to make it your
own phone.
Make sure that all the handsets registered to
the base station are Philips D40 models in
order to have this feature functioning properly.
Sound settings
Set the handset's ringtone
You can select from 10 ringtones.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] > [Ring
tones], then press MENU/OK to confirm.
3
Select a ringtone, then press MENU/OK
to confirm.
» The setting is saved.
Set the handset's ringtone volume
You can select among 5 ringtone volume levels
or [Off].
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Ring volume], then press MENU/OK to
confirm.
3
Select a volume level, then press MENU/
OK to confirm.
» The setting is saved.
Silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is turned on, your phone
does not ring or send any alerts or sound.
Note
•
When you press
to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] > [Silent
mode], then press MENU/OK to confirm.
3
Select [On/off], then press MENU/OK to
confirm.
» The setting is saved.
4
Select [Start & end], then press MENU/
OK to confirm.
5
Set the time, then press MENU/OK to
confirm.
» The setting is saved.
is displayed.
»
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] > [Key
tone], then press MENU/OK to confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Docking tone], then press MENU/OK to
confirm.
EN
19
Advertisement
Table of Contents
