Table of Contents
Advertisement
ECO+ mode
When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Select [Menu] > [Phone setup] > [ECO+
mode], then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO+ is displayed in standby mode
after a while.
Note
•
Make sure that all the handsets registered to the base
station are XL490/XL495 in order to have the ECO+
feature functioning properly.
•
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to "listen" more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.
ECO
ECO+
Handset icon display
mode
mode
[Off]
[Off]
[Off]
[On]
after the ECO+ mode is
activated during standby
mode .
[On]
[Off]
[On]
[On]
to
mode is activated in
standby mode.
26
EN
and
are off.
is displayed only
is displayed.
is displayed and changed
when the ECO+
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1
Select [Menu] > [Phone setup] > [Phone
name], then press [OK] to confirm.
2
Enter or edit the name. To erase a
character, select [Clear].
3
Press [OK] to confirm.
» The setting is saved.
Set the date and time
For information, see 'Set the date and time (see
'Set the date and time' on page 9)'.
Set the display language
Note
•
This feature only applies to models with multiple-
language support.
•
Languages available vary from country to country.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
» The setting is saved.
Auto answer
When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press
to answer the incoming call.
1
Select [Menu] > [Phone setup] > [Auto
answer], then select [OK] to confirm.
or
Advertisement
Table of Contents
