Eco+ Mode; Name The Handset; Set The Date And Time; Set The Display Language - Philips Linea V M355 Extended User Documentation

Set the battery tone
Battery tone is the sound made
when the battery is low and needs
recharging.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds]
> [Battery tone], then press
MENU/OK to confirm.
3
Select [On]/[Off], then press
MENU/OK to confirm.
» The setting is saved.

ECO+ mode

When the ECO+ mode is activated, it
eliminates the radiation of the handset
and base station in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] > [ECO+
mode], then press MENU/OK to
confirm.
3
Select [On]/[Off], and press
MENU/OK to confirm.
» The setting is saved.
» ECO+ is displayed in standby
mode after a while.
Note
•
Make sure that all the handsets registered to
the base station are M350/M355 in order to
have the ECO+ feature functioning properly.
•
When ECO+ is activated, the standby time is
reduced. This is because in ECO+ mode the
base station is not transmitting any signal in
standby mode; therefore the handset needs
to "listen" more frequently for signals from
the base station to detect incoming calls
or other requests from the base station.
The time it takes for the handset to access
features like call setup, call log, paging, and
phonebook browsing is also delayed. The
handset will not alert you to link loss in case
of power loss or moving out of range.
24
EN

Name the handset

The name of the handset can be up
to 12 characters. It is displayed on the
handset screen in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] > [Phone
name], then press MENU/OK to
confirm.
3
Enter or edit the name. To erase a
character, press REDIAL/C.
4
Press MENU/OK to confirm.
» The setting is saved.

Set the date and time

For information, see 'Set the date and
time' in the 'Get started' section.

Set the display language

Note
•
This feature only applies to models with
multiple-language support.
•
Languages available vary from country to
country.
1
Press MENU/OK.
2
Select [Phone setup] > [Language],
then press MENU/OK to confirm.
3
Select a language, then press
MENU/OK to confirm.
» The setting is saved.

Auto answer

When you activate the auto answer
feature, you can connect to the
incoming call automatically once