Important safety instructions Warning • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • Refer to safety information before using the product.
Page 3
Overview In call Standby Display icons Display icons Enter the option menu. Access the main menu. It displays the connection between the handset The silent mode is set, but is outside of active Earpiece and the base. The more bars are shown, the period.
Get started Connect the charger Insert batteries Charge your phone Configure your phone 1 Set the country and language if prompted. Charge 8 hours 2 Set the date and time. • If the time is in 12-hour format, press to select >...
Register additional handsets You can register additional handsets to the base Manual registration station. 1 Press 2 Select [Services] > [Register], then press Auto registration to confirm. Place the unregistered handset on the base station. 3 Press and hold on the base station for 5 seconds. The handset detects the base station and »...
Technical data Battery • Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries Use only the supplied batteries. Adapter Philips: S003IB0600040 SSW-1920UK-2 Input: 100-240 V 100-240 V 50/60 Hz 0.15 A 50/60 Hz 0.2 A Output: 6 V 400 mA...
Page 7
Frequently asked questions No signal bar is displayed on the screen. My handset is in searching status, what do I do? The handset on the charger does not charge. The caller ID does not display. • The handset is out of range. Move it closer to the • Make sure that the base station has power supply.
Page 8
For information, refer to the extended user documentation online.
Need help?
Do you have a question about the D4050W and is the answer not in the manual?
Questions and answers