Table of Contents
Advertisement
12 Services
The phone supports a number of features that
help you handle and manage the calls.
Make sure that all the handsets registered to
the base station are Philips D40 models in
order to have this feature functioning properly.
Auto conference
To join an external call with another handset,
press
.
Note
•
This feature is available only for multi-handset versions.
Activate/Deactivate auto conference
1
Press MENU/OK.
2
Select [Services] > [Conference], then
press MENU/OK to confirm.
3
Select [Auto]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Call list type
You can set whether you can view all incoming
calls or missed calls from this menu.
Select the call list type
1
Press MENU/OK.
2
Select [Services]> [Call list type], then
press MENU/OK to confirm.
3
Select an option, then press MENU/OK to
confirm.
Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 10 digits.
The maximum length of an auto prefix number is 10
digits.
•
This is a country dependent feature.
Set auto prefix
1
Press MENU/OK.
2
Select [Services] > [Auto prefix], then
press MENU/OK to confirm.
3
Enter the detect number, then press
MENU/OK to confirm.
4
Enter the prefix number, then press
MENU/OK to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with * and #.
Network type
Note
•
This is a country dependent feature. It only applies to
models with network type support.
.
EN
23
Advertisement
Table of Contents
