Selecting your handset’s ringing melody...18 Selecting your handset’s ringing volume ...18 Turning the key tone on/off...18 8 ADVANCED FEATURES...19 DIAL MODE *...19 RECALL DURATION * ...19 SYSTEM ...20 REGISTERING A HANDSET...20 UN-REGISTERING A HANDSET ...20 CHANGING PIN...21 RESETTING...21 *Country dependent CONTENTS www.philips.com/faqs/dect...
Page 3
CALLING SOMEONE IN THE HOUSE WHILE YOU ARE TALKING ON THE PHONE...23 TRANSFERRING YOUR CALL TO ANOTHER HANDSET ...24 MAKING A 3-WAY CONFERENCE CALL ...24 DECT 225 ANSWERING MACHINE ...25 DISPLAY ...25 TURNING THE ANSWERING MACHINE ON/OFF...26 OUTGOING MESSAGES (OGM) ...26 Setting the default OGM language* ...26...
Hereby, Philips declares that the DECT 221xx and the DECT 225xx are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone network of the country indicated on the sticker located under the base station.
A beep indicates that the phone is properly plugged (DECT 225 only). Connect the telephone line cord to the phone socket on the back of the base unit and to the wall phone socket.
(DECT 225 only). The base is now in the registration mode. (If the base is full and cannot take on any more handset, it will emit a reject tone instead (DECT 225 only) and you will not be able to register any more handset.
About your phone Paging Key DECT 225 For more details on your DECT 225 base station, see Section 12 - DECT 225 answering machine- page 25 ABOUT YOUR PHONE Caller ID & Scroll down Key Use to enter call list.
More menu options are available upward. More menu options are available downward. SETTINGS MENU KEY TONE BACKLIGHT RECALL * DIAL MODE * HANDSET NAME ANSWERING MACHINE LANGUAGE * (DECT 225 only) REGISTER DELETE HANDSET PIN CODE RESET ABOUT YOUR PHONE LANGUAGE MENU www.philips.com/faqs/dect...
Press the DELETE key to delete an incorrect digit. Entering a pause Press and hold the PAUSE key Press the TALK key. www.philips.com/faqs/dect Making calls turns on if you enter more than 12 digits. to enter a pause. It is displayed as P.
Note: Press the OK key to switch between the name and number of the record. Press the TALK key. Ending a call Press the END key or place the handset on the base unit or charger. MAKING CALLS www.philips.com/faqs/dect...
During a call, you can speak to someone privately without having the caller hear your conversation. To mute/unmute a call, Press the MUTE key. Note: appears to indicate the call is being muted. www.philips.com/faqs/dect will flash on the display. turns on and the caller information is displayed. When the phone is ringing, you MAKING CALLS...
Second caller’s caller ID If you have subscribed for caller ID, the caller ID of this second caller appears on the display. (Subscription needed) Subsequent presses of the RECALL key will switch you between these 2 callers. MAKING CALLS www.philips.com/faqs/dect...
You are not allowed to save a name that already exists in the phonebook. Edit the name and try again. Enter the phone number. 7. Press the OK key to save the number. Adding another record Repeat steps 3 to 7 to add another record. www.philips.com/faqs/dect USING YOUR PHONEBOOK...
Press the MENU key. Select PHONE BK and press the OK key. Select DEL ALL and press the OK key. Press the OK key again to confirm the action. WARNING: All deleted records cannot be recovered. USING YOUR PHONEBOOK www.philips.com/faqs/dect...
Edit the number if necessary. Press the OK key. Note: The call record is now saved into the phonebook. The call record is still in your call list but it will show the new name entered. www.philips.com/faqs/dect Call records CALL RECORDS...
Press the OK key to save the name. Edit the number if necessary. Press the OK key. Note: The record is now saved into the phonebook. The dial record is still in your dial list but it will show the new name entered. CALL RECORDS www.philips.com/faqs/dect...
Instead of deleting the records one by one, you have this option to delete the entire dial list. While you are viewing any dial record, Press and hold the DELETE key until you are prompted to confirm the action. Press the OK key. www.philips.com/faqs/dect CALL RECORDS...
Select SETTINGS and press the OK key. Select BACKLIT and press the OK key. The current setting is displayed. Select ON or OFF. Press the OK key to confirm. if you want to delete the current name and use the PERSONALIZING YOUR PHONE www.philips.com/faqs/dect...
Key tones are tones that your phone makes each time you press a key on the handset. Press the MENU key. Select SETTINGS and press the OK key. Select KEY TONE and press the OK key. The current setting is displayed. Select ON or OFF. Press the OK key to confirm. www.philips.com/faqs/dect PERSONALIZING YOUR PHONE...
Press the OK key to confirm. Note: This setting is useful when using operator services. The use of some services accessed with R key +1, R key+2, Key+3 (call waiting, call forward...) will depend on the recall setting. *Country dependent Advanced features ADVANCED FEATURES www.philips.com/faqs/dect...
Registering a handset You can register up to 4 handsets to your DECT 221 base station and up to 5 handsets to your DECT 225 base station. One handset can be registered to only one base at a time. Press the MENU key.
You can reset the display, sounds, and other settings of your phone. Refer to the section of Default settings (Page 31). Press the MENU key. Select SETTINGS and press the OK key. Select RESET and press the OK key. Press the OK key again to confirm. SYSTEM www.philips.com/faqs/dect...
Note: All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays blinking oooo . Stop the paging You can stop the paging by pressing any key on each handset or pressing the PAGING key on the base again. www.philips.com/faqs/dect Additional features will turn off. ADDITIONAL FEATURES...
Note: After the other handset has answered, you can press the INTERCOM key repeatedly to switch between the external call and the intercom call. Note: If the other handset does not answer, press the INTERCOM key again to cancel the attempt and return to the external call. Using multi-handsets USING MULTI-HANDSETS www.philips.com/faqs/dect...
Press the CONFERENCE key to put the external line on hold and you can talk to the other handset in private. Press and hold the CONFERENCE key to re-establish the conference call. Note: Ending the call before the other handset answers will drop the external call. www.philips.com/faqs/dect USING MULTI-HANDSETS...
DECT 225 Answering machine Volume Down Paging Next Message Display There is a display on the answering machine. Refer to the following table for descriptions of the display. Display Meaning Memory is full. No new messages can be recorded. The answering machine is busy. You are in communication and the answering machine is ON.
The language of the default OGM of your answering machine is selected on the handset. Press the MENU key. Select SETTINGS and press the OK key. Select TAM LANG and press the OK key. Select the desired language. Press the OK key to confirm. www.philips.com/faqs/dect DECT 225 ANSWERING MACHINE *Country dependent...
The number of unheard messages will blink on the display. They will stop blinking after all the messages are reviewed. It worked when the OGM was played but did not work after the end of OGM when the caller started to leave a message. DECT 225 ANSWERING MACHINE www.philips.com/faqs/dect...
You can adjust the volume for and during call screening and message playback. Note: Call screening will be turned off when the volume is turned to minimum. Press the VOLUME UP key to increase the volume. Press the VOLUME DOWN key to decrease the volume. www.philips.com/faqs/dect DECT 225 ANSWERING MACHINE...
Use the VOLUME UP key and the VOLUME DOWN key to change the third digit. Press the PIN key to confirm the third digit. Two beeps are emitted to confirm that the change has been done and the display shows your new PIN digit per digit. DECT 225 ANSWERING MACHINE www.philips.com/faqs/dect...
To repeat the current message To play the next message To stop the message play back To delete the current message www.philips.com/faqs/dect n. Press a key (see table below) anytime to nctio Remote Access Key twice DECT 225 ANSWERING MACHINE...
Earpiece volume Keylock System PIN * This feature/function will not be set back to default after reset. **Country dependent Appendix PHILIPS Answering machine (DECT 225 only) Melody 1 Default OGM language** Level 3 Ring delay Security PIN Base volume 100 ms...
The handset is unable to register (DECT 221 only) The answering machine does not record calls (DECT 225 only). Unable to perform remote operation (DECT 225 only). If the above solutions do not help, remove the power from both the handset and the base. Wait for 15 minutes and try again.
Declaration of conformity PHILIPS Consumer Electronics Route d’Angers 72081 Le Mans Cedex 9 France Declare that the products DECT221xx and DECT225xx are in compliance with ANNEX IV of the R&TTE-Directive 1999/5/EC and then with the following essential requirements: Article 3.1 a : (protection of the health & the safety of the user)