Page 1
Always there to help you Register your product and get support at www.philips.com/support D450 Question? D455 Contact Philips Extended user documentation...
Contents Switch between uppercase and lowercase 1 Important safety instructions 7 Phonebook View the phonebook Search a record 2 Your phone Call from the phonebook What is in the box Access the phonebook during a call Overview of the phone Add a record Overview of the base station Edit a record...
Page 4
Turn the answering machine on or off Family notes Set the answering machine language Set the answer mode Announcements Incoming messages Remote access 13 Services Call list type Auto conference Call barring Blacklist Network type Auto prefix Select the recall duration Dial mode Auto clock Register additional handsets...
1 Important safety • Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure instructions the handset is not too close to your ear. • This equipment is not designed to make emergency calls when the power fails.
2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips Power adapter** offers, register your product at www.philips. com/welcome. What is in the box Line cord* 2 x AAA batteries Handset**...
• Press and hold to switch the handset Overview of the phone on or off. • Press to enter a space during text editing. • Press and hold to lock/unlock the keypad in standby mode. • Press and hold to enter a pause when making a call.
Delete the current playback message. o Battery door • Press and hold to delete all old messages. Overview of the base station Decrease/increase the speaker volume. D450 Skip backward/forward during playback. • Play messages. • Stop messages playback. g LED indicator •...
3 Get started Caution • Make sure that you have read the safety instructions in the 'Important safety instructions' section before you connect and install your handset. Connect the base station Warning Connect each end of the power adapter to (for multi handset version only): •...
Install the supplied batteries Configure your phone (country dependent) When using your phone for the first time, you see a welcome message. Press [OK]. Set the country/language Select your country/language, then press [OK] to confirm. » The country/language setting is saved. Note •...
Change the remote access Check the battery level PIN code (for D455) Note • This feature is available only for models with answering machine. • The default answering machine remote access PIN code is 0000 and it is important to change it to ensure the security.
Answering machine (D455 only): Display icons it flashes when there is a new message or when the memory is full. In standby mode, the icons shown on the main It is displayed when the telephone screen tell you what features are available on answering machine is turned on.
4 Calls Note • The talk time of your current call is displayed on the call timer. • If you hear warning tones, the phone is almost out of Note battery or out of range. Charge the battery or move the phone close to the base station.
» The number displayed on the screen is Note dialed out. • Placing the handset to the base station or charging cradle does not end the call when the auto hangup feature is turned off (see 'Activate/Deactivate auto Answer a second call hang up' on page 25).
Page 16
Press [Option], select [Conference] and • then press [OK] again to confirm. » The two calls are combined and a conference call is established.
5 Intercom and » For multi-handset versions, the handsets available for intercom are conference calls displayed, then go to step 2. Select a handset, then press [OK] to confirm. » Wait for the other side to answer your call. Note •...
Page 18
Note • Press to join an ongoing conference with another handset if [Services] > [Conference] is set to [Auto]. During the conference call Press [Int.] to put the external call on hold and go back to the internal call. » The external call is put on hold. Press [Conf] to establish the conference call again.
6 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers Press once or several times on the alphanumeric key to enter the selected character. Press [Clear] to delete a character. Press and hold [Clear] to delete all characters.
7 Phonebook Scroll the contact list Press or select [Menu] > [Phonebook] > [View] > [OK] to access the This phone has a phonebook that stores up to phonebook list. 50 records. You can access the phonebook from Press to scroll through the the base station.
Add a record Delete a record Note Select [Menu] > [Phonebook] > [Delete], then press [OK] to confirm. • If your phonebook memory is full, a notification message is displayed on the handset. Delete some Select a contact, then press [OK] to records to add new ones.
8 Call log Note • This is a country dependent feature. The call log stores the call history of all missed, received or blocked calls. The incoming call Select the call list type history includes the name and number of the caller, call time and date.
Select a record on the list. Press to make the call. Delete a call record Press . » The incoming call log is displayed. Select a record, then press [Option]. Select [Delete], then press [OK] to confirm. » A confirmation request is displayed on the handset.
9 Redial list Delete a redial record Press [Redial] to enter the list of dialed The redial list stores the call history of dialed calls. calls. It includes the names and/or numbers you Select a record, then press [Option] to have called.
10 Phone settings Select [Menu] > [Phone setup] > [Sounds] > [Silent mode], then press [OK] to confirm. Select [On/off] > [On]/[Off], then press You can customize the settings to make it your [OK] to confirm. own phone. » The setting is saved. Select [Start &...
[Sounds] > [MySound], then press [OK] to confirm. • Make sure that all the handsets registered to the base station are D450/D455 in order to have the ECO+ Select a profile, then press [OK] to feature functioning properly. confirm. •...
Select [Menu] > [Phone setup] > [Phone Activate/Deactivate auto hang name], then press [OK] to confirm. Enter or edit the name. To erase a character, press [Clear]. You can activate the auto hang up function so Press [OK] to confirm. that you can end a call by simply placing the »...
11 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. Set the alarm Select [Menu] > [Alarm], then press [OK] to confirm. Select [On once] or [On daily], then press [OK] to confirm. Enter an alarm time, then press [OK] to confirm.
12 Telephone Through the base answering Press to turn the answering machine on or off in standby mode. machine Note • When the answering machine is switched on, it answers incoming calls after a certain number of rings based on Note the ring delay setting.
Press [OK] to stop recording or the Set the answer mode recording stops after 3 minutes. » You can listen to the newly recorded You can set the answering machine and select if announcement on the handset. the callers can leave messages. Select [Record also]if you allow the callers to leave messages.
message indicator flashes on the answering Delete an incoming message machine and the handset. From the base Press when you listen to the message. Note » The current message is deleted. • If you pick up the phone when the caller leaves a From the handset message, the recording stops and you can talk to the caller directly.
Select [Activate]/[Deactivate], then press Set the ring delay [OK] to confirm. » The setting is saved. You can set the number of times the phone rings before the answering machine picks up the call. Change the PIN code Select [Menu] > [Answ. Machine] > [Ring delay], then press [OK] to confirm.
Page 33
Remote access commands Function Listen to the previous message. Listen to messages. Skip to the next message. Delete the current message. Switch the answering machine on (not available when you listen to the messages). Stop listening to the message. Switch the answering machine off. (not available when you listen to the messages).
13 Services Call barring You can block outgoing calls to numbers, such The phone supports a number of features that as overseas calls or undesirable hotlines by help you handle and manage the calls. barring calls that start with certain digits. You can create 4 sets of numbers with 4 digits at maximum for each set of numbers.
Select [Blacklist], then press [OK] to Enter the old barring PIN/passcode. The default PIN is 0000. Then press [OK] to confirm. confirm. Enter the PIN/passcode. The default PIN is 0000. Then press [OK] to confirm. Enter the new PIN/passcode, then press [OK] to confirm.
6043338888, your phone changes the number Dial mode to 12503338888 when it dials out. Note Note • This feature only applies to models that support both • The maximum length of a detect number is 10 digits. tone and pulse dial. The maximum length of an auto prefix number is 10 digits.
Register additional handsets Unregister the handsets You can register additional handsets to the base Select [Menu] > [Services] > [Unregister], station. The base station can register up to 4 then press [OK] to confirm. handsets. Enter the system PIN. (The preset PIN is 0000).
Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. This product has been designed, tested and manufactured according the European R&TTE This symbol on a product means that the directive 1999/5/EC.
Page 40
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Page 41
16 Frequently Select your own language. The handset loses connection with the base asked questions or the sound is distorted during a call. Check if the ECO+ mode is activated. Turn it off to increase the handset range and enjoy the optimal call conditions.
Page 42
• The phone is at a location with thick walls. Move the base away from them. The handset does not ring. Make sure the handset ringtone is turned on. The caller ID does not display. • The service is not activated. Check with your service provider.
17 Appendix A B Г 2 A B C Æ Ä Å Ç Δ Ε Ζ 3 D E F É Η Θ Ι 4 G H I Text and number input tables Κ Λ Μ 5 J K L Ν...
Page 44
m n o Ћ 6 Р С Т У p q r s Җ Š 7 Ф Х Ц Ч Π Θ Σ ß t u v Lj 8 Ш Щ Ъ Ы w x y z Ž 9 Ь Э Ю Я Ω Ξ Ψ...
Page 45
18 Index ECO+ mode family note find handsets/paging additional handsets alarm announcements answering machine answering machine language auto answer auto clock auto conference incoming message auto hang up intercom auto prefix internal call base station language setting installation overview answering machine battery 8, 9, 36 handset...
Page 46
registration power adapter recall time redial register/unregister remote access to the answering machine ring delay ringtone safety save a number signal strength silent mode sounds docking keytone sound profile speaker phone standby mode text entry time setting troubleshooting/FAQ two calls/call on hold volume adjustment...