Specifications - Tripp Lite SmartPro SMARTINT2200VS Specification

connected devices
Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive gray color scheme

Specifications

OUTPUT
Output Volt Amp Capacity
(VA)
Output kVA capacity (kVA)
Output Watt Capacity
(watts)
Output kW capacity
Output power factor
Nominal Output Voltage(s)
Supported
Nominal Voltage details
Frequency compatibility
Output voltage regulation
(line mode)
Output voltage regulation
(Battery mode)
Built-in UPS output
receptacles
Included output power
cables
Built-in controllable
switched load banks
Output circuit breaker
Output AC waveform (AC
mode)
Output AC waveform
(battery mode)
INPUT
Rated input current (at
maximum load)
Nominal Input Voltage(s)
Supported
UPS input connection type
UPS input connection
description
Phase
2200
2.2
1600
1.6
0.7
220V; 230V; 240V
230v inverter nominal output voltage
50 / 60 Hz
-19% +8%
+/- 5%
8 C13 outlet(s); 1 C19 outlet(s)
Includes 3 C13 to C14 output power cables
Three switchable two-outlet C13 load banks
10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered
Sine wave
PWM sine wave
11.3A
230V AC
C20 inlet
IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles
Single-Phase