Voltage Regulation - Tripp Lite SmartPro SMARTINT2200VS Specification

BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
DC system voltage (VDC)
Battery recharge rate
(included batteries)
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery replacement
description

VOLTAGE REGULATION

Voltage regulation
description
Overvoltage correction
Undervoltage correction
Severe undervoltage
correction
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
UPS AC suppression
response time
EMI / RFI AC noise
suppression
PHYSICAL
Installation form factors
supported with included
accessories
Primary form factor
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / inches)
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / cm)
7 min. (1600w)
19 min. (800w)
48
Less than 4 hours from 10% to 90%
RBC54
Battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V
Input voltages between 245 and 282 are reduced by 12%
Input voltages between 177 and 199 are boosted by 14%
Input voltages between 151 and 176 are boosted by 30%
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates power-failure, overload and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
480
Instantaneous
Yes
Tower
Tower
14.2 x 9.2 x 12
36.2 x 23.5 x 30.5