Reviewing And Deleting The Last Scene Recorded - Canon HG10 Instruction Manual

NOTES
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide
angle W.
- Automatic backlight correction
deactivates.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
( 46). You can select the length of
time until shut-off with the [
OFF] setting ( 46).
To restore the power if the camcorder
shut off, turn the
MODE and release it, or turn the
switch to and back to ON again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
return to record pause mode.
- Change the position of the
switch.
- Turn the switch toward MODE.
• Depending on other settings, the
camcorder may take longer than
1 second to recover from standby
mode.
Reviewing and Deleting the Last Scene
Recorded
Even in
back the last scene recorded in order to
STANDBY
switch toward
/
mode you can play
check it. You can also delete the scene
while reviewing it.
1
If the function guide does not
appear on screen, press
display it.
2
Press to select
• If does not appear on the
function guide, repeatedly press
to display it.
• The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
Deleting a Scene After Recording It
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, press
to select
3
Press to select [YES] and press
.
NOTES
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene if after the scene was recorded
you changed the operating mode or the
camcorder was turned off.
( 21)
to
.
( 21)
and press .
33