Canon HG10 Instruction Manual page 35

Special Playback Modes
To enter the special playback modes, you can use the buttons on the LCD panel or
wireless controller (
Special playback mode
Fast playback
Slow playback
Skip to the beginning of:
the next scene
the current scene
the previous scene
Return to normal playback
During some special playback modes, you may notice some anomalies (blocky video
artifacts, banding, etc.) in the playback picture.
* You can also use the control dial.
** The speed indicated on the screen is approximate.
1
If the function guide does not
appear on screen, press
display it.
2
Press or to adjust the
volume.
• To turn off the volume completely,
keep pressing
icon changes to
• You can press
the function guide during
playback.
14). There is no sound during the special playback modes.
Initial mode
Normal playback
Playback pause
Normal playback
Special playback
to
until the volume
.
again to hide
On the camcorder
press...
*
or
Press again to increase the playback speed
5x → 15x → 60x the normal speed**
SLOW
*
or
Press again to increase the playback speed
1/8 → 1/4 the normal speed
twice
/
Using Headphones
The headphones are connected to the
AV OUT/ terminal, which is used for
both the headphones and the audio/
video output. Before connecting the
headphones, follow the procedure
below to change the function of the
terminal from AV output to
(headphones) output and make sure the
icon appears on the screen.
On the wireless
controller press...
SEARCH
or
SEARCH
SLOW
or
NEXT
PREV.
PREV.
twice
PLAY
35