Canon HG10 Instruction Manual page 91

Hd camcorder
Hide thumbs Also See for HG10:
Table of Contents

Advertisement

Problem
START/STOP
Pressing
will not start
recording.
Even after stopping recording, the
HDD access indicator does not go off.
START/STOP
The point where
pressed does not match the
beginning/end of the recording.
The recording suddenly stops shortly
after starting recording.
Camcorder will not focus.
Sound is distorted.
Viewfinder picture is blurred.
Playback/Editing
Problem
Pressing the playback button does
not start playback.
Occasionally the operation sound can
be heard.
Set the camcorder to
While a scene is being recorded on the hard disk, additional recording is
not possible.
The hard disk is full. Delete some recordings or initialize the hard disk to
free some space.
The hard disk contains the maximum number of scenes. Delete some
recordings.
Recording may not be possible while the drop protection mechanism is
active (
appears).
The camcorder has exceeded its operational temperature (
Turn off the camcorder and let it cool down before resuming use.
The camcorder has fallen below its operational temperature
(
appears). Turn it off and use it in a warmer location. Make sure to
avoid a rapid temperature change.
The scene is being recorded on the hard disk. This is not a malfunction.
was
There is a slight interval between pressing
of recording on the hard disk. This is not a malfunction.
If recording near loud sounds or strong vibrations, move to another
location.
The camcorder has exceeded its operational temperature (
Turn off the camcorder and let it cool down before resuming use.
Autofocus does not work on the subject. Focus manually.
Adjust the viewfinder with the dioptric adjustment lever.
Lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-
cleaning cloth. Never use tissue paper to clean the lens.
When recording near loud sounds (such as fireworks or concerts), sound
may become distorted. This is not a malfunction.
Adjust the viewfinder with the dioptric adjustment lever.
Set the camcorder to
The camcorder has exceeded its operational temperature (
Turn off the camcorder and let it cool down before resuming use.
The camcorder has fallen below its operational temperature
(
appears). Turn it off and use it in a warmer location. Make sure to
avoid a rapid temperature change.
If the camcorder is moved suddenly while recording, sound from the hard
disk may be recorded.
Solution
mode.
START/STOP
and the actual start
Solution
mode.
29
38
61
38
44
appears).
29
appears).
53
30
100
30
34
appears).
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents