Initializing The Memory Card - Canon HG10 Instruction Manual

FUNC.
( 23)
FUNC. PROTECT
[ PROTECT]: The image selection
screen appears.
F
ROM THE IMAGE SELECTION SCREEN
1 Press or to select the still
image you want to protect.
2 Press to protect the still
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
3 Repeat steps 1-2 to protect
additional images or press
twice to close the menu.
IMPORTANT

Initializing the memory card (

permanently erase all recorded still
images, even the protected ones.
Initializing the Memory Card
Initialize memory cards when you use
them with this camcorder for the first
time, or to erase all the still images on
them.
Press
FUNC.
73) will
Options
[INITIALIZE]
Clears the file allocation table but does not
physically erase the stored data.
[COMPL.INIT.]
Erases all data completely.
FUNC.
( 23)
FUNC. MENU
STILL IMG OPER.
INITIALIZE CARD
Select the Card Initialization
method
FUNC. YES*
* Press to cancel the complete
initialization while it is in progress. All the
image files will be erased and the memory
card can be used without any problem.
IMPORTANT
Initializing the memory card will erase all
still images, even the protected ones. The
original still images cannot be recovered.
( 21)
73