Canon HG10 Instruction Manual page 94

Additional Information
Message
COULD NOT ADD TO PLAYLIST
TEMPERATURE TOO HIGH
CANNOT PLAY BACK
CANNOT READ THE HARD DISK
UNABLE TO RECOGNIZE THE DATA You transferred data to the camcorder recorded in a different television system
ACCESS ERROR
AVOID MOVING THE CAMCORDER
UNABLE TO RECOVER DATA
HARD DISK FULL
TASK IN PROGRESS
DO NOT DISCONNECT THE
POWER SOURCE
DROP SENSOR IS TURNED OFF
DROP DETECTED
POWER WAS TURNED OFF
USE THE CAMCORDER TO
INITIALIZE THE HARD DISK
BUFFER OVERFLOW
RECORDING WAS STOPPED
NO CARD
NO IMAGES
94
Scene could not be added to the playlist. You cannot add more than 999
scenes to the playlist. Delete some recordings.
The camcorder has exceeded its operational temperature (
Turn off the camcorder and let it cool down before resuming use.
Hard disk could not be read.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
This message can also appear if the camcorder has exceeded its operational
temperature ( appears). Turn off the camcorder and let it cool down
before resuming use.
(NTSC).
There was an error when reading the hard disk or attempting to write onto it.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
Try not to move the camcorder while the image is being recorded.
Could not recover a corrupted file.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
The hard disk is full (" END" appears on the screen). Delete some
recordings to free some space.
The camcorder is updating the hard disk. Do not disconnect the compact
power adapter or remove the battery pack.
The camcorder was turned on while [DROP SENSOR] is set to [OFF]. In such
case, dropping the camcorder can increase the likelihood of hard disk
damage.
When the camcorder is dropped while it is on or connected to a computer with
the USB cable, the camcorder automatically turns off to protect the hard disk.
This message appears the next time the camcorder is turned on. This is not a
malfunction.
A hard disk error occurred and data cannot be recovered. Initialize the hard
disk.
Drops were detected repeatedly and the buffer became full. Move to a more
stable location and allow data to be written onto the hard disk. Set [DROP
SENSOR] to [OFF] if using the camcorder in a situation where drops are likely
to be detected repeatedly.
There is no memory card in the camcorder.
No images are recorded on the memory card.
Explanation
38
appears). –
–
101
–
–
–
101
–
–
101
38
–
44
–
61
44
27
–