Canon HG10 Instruction Manual page 99

• Although the battery pack's operating
temperature range is from 0 °C to
40 °C, the optimal range is from 10 °C
to 30 °C. At cold temperatures,
performance will temporarily decline.
Warm it in your pocket before use.
• Replace the battery pack if the usable
time after full charge diminishes
substantially at normal temperatures.
About the battery terminal cover
The battery terminal cover has a [
shaped hole. This is useful when you
wish to differentiate between charged
and uncharged battery packs.
Back side of the battery pack
Terminal cover attached
Charged
Memory Card
• We recommend saving backups of
memory card images on your
computer. Image data may be
corrupted or lost due to memory card
defects or exposure to static
electricity. Canon makes no
warranties for corrupted or lost data.
• Do not turn off the camcorder,
disconnect the power source or
remove the memory card while the
CARD access indicator is flashing.
]-
Uncharged
• Do not use memory cards in places
subject to strong magnetic fields.
• Do not leave memory cards in places
subject to high humidity and high
temperature.
• Do not disassemble, bend, drop, or
subject memory cards to shocks and
do not expose them to water.
• Do not touch or expose the terminals
to dust or dirt.
• Check the direction before inserting
the memory card. Forcing a memory
card into the slot if it is not correctly
oriented may damage the memory
card or the camcorder.
• Do not attach any labels or stickers
on the memory card.
Lithium Button Battery
WARNING!
• The battery used in this device may
present a fire or chemical burn hazard
if mishandled. Do not recharge,
disassemble, heat above 100 °C or
incinerate the battery.
• Replace the battery with a CR2025
made by Panasonic, Hitachi Maxell,
Sony, Sanyo, or with Duracell2025.
Use of other batteries may present a
risk of fire or explosion.
• The used battery should be returned
to the supplier for safe disposal.
• Do not pick up the battery using
tweezers or other metal tools as this
will cause a short circuit.
• Wipe the battery with a clean dry
cloth to ensure proper contact.
99