Canon HG10 Instruction Manual page 20

Preparations
3
Insert the battery holder.
Point the wireless controller at the
camcorder's remote sensor when
you press the buttons.
NOTES
• The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
• If the wireless controller does not work,
check that [WL.REMOTE] is not set to
[ OFF ] (
replace the battery.
• When the optional Tele-converter or
Wide-converter is attached to the
camcorder, it may partially obstruct the
remote sensor. Use the wireless
controller from a different angle.
20
46). Otherwise,
Accessories
1
Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
and middle fingers, and the
button with your thumb.
START/STOP
2
Attach the supplied shoulder
strap.
Pass the ends through the strap
mount and adjust the length of the
strap.