Canon HG10 Instruction Manual page 65

T
O RUN THROUGH THE STILL IMAGES
Press or and hold it down to run
quickly through the still images.
T 10 100
O SKIP OR
1 If the function guide does not
appear on screen, press
display it.
2 Press to select
3 Press or to select [
10 IMAGES] or [
IMAGES].
4 Press or to jump the number
of images selected and press
• You can press
the function guide.
• You can also use the control dial.
IMPORTANT
• Observe the following precautions while
the card access display (
on screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not remove the memory card.
STILL IMAGES
to
.
JUMP
JUMP 100
again to hide
) appears
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
/ switch or the operating mode.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
FUNC.
( 23)
1
FUNC.
Press
2
Press or
[ SLIDESHOW] and press
You can also use the control dial.
3
Press or
and press
• Images are played back one after
another.
FUNC.
• Press
Index Screen
.
1
Press the W side of the zoom lever.
The still images index screen appears.
2
Use the navigation buttons to
select an image.
• Move the green selection frame to
the image you want to view.
• You can also turn the control dial
to run quickly through the index
screens.
3
Press
The index screen closes and the
selected image is displayed.
.
to select
to select [START]
.
to stop the slideshow.
.
.
65