Canon HG10 Instruction Manual page 36

Video
FUNC.
( 23)
1
FUNC.
Press .
2
Use the navigation buttons to
select the icon and press
to open the setup menus.
3
Press or to select [SYSTEM
SETUP] and press
4
Press or to select
[AV/PHONES] and press
5
Press to select [
and press .
6
FUNC.
Press .
appears.
36
In
of the headphones with the [PHONES
VOL.] setting (
mode, use the navigation buttons and
the function guide following the same
procedure as when adjusting the
speaker's volume.
( 21)
• Do not connect the headphones to the
• When using headphones, make sure to
.
• The sound of the built-in speaker will be
.
PHONES]
• Use commercially available headphones
• When you turn off the camcorder or
• The volume of the headphones cannot
T
O ADJUST THE VOLUME OF THE
HEADPHONES
mode, adjust the volume
47). In
IMPORTANT
AV OUT/ terminal if the
not appear on the screen. If you connect
the headphones while the terminal is set
to AV output, only noise will be output.
lower the volume to an appropriate
level.
muted when you close the LCD panel,
when you connect the STV-250N Stereo
Video Cable to the AV OUT/
or when [AV/PHONES] is set to
[ PHONES].
NOTES
with a ∅ 3.5 mm minijack and a cable
no longer than 3 m.
change the operating mode, the
[AV/PHONES] setting in
will return to [
be adjusted while recording.
icon does
terminal
mode
AV].