Reviewing And Deleting The Last Scene Recorded - Canon VIXIA HF10 Instruction Manual

Video
Deleting a Scene After Recording It
(1)
NOTES
After recording a scene:
1
Review the scene as described in
the previous section.
2
While reviewing the scene, select
(~) the
iffi
icon and press
@.
3
Select
(~)
[YES] and press
@.
(CO 26)
+@
~f:~~~
\..._---
1
If the joystick guide does not
appear on screen, press
@
to
display it.
If
~
does not appear on the joystick
guide, repeatedly push the joystick
C.-)
toward [NEXT] to display it.
2
Push the joystick (.... ) toward
~.
The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
I.······,
,
...
• If you close the LCD panel under some
circumstances (for example while
recording, while a menu is being
displayed, or while the memory card slot
is open), the camcorder may not enter
the standby mode. Check that the
~
indicator changes to orange.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
(CO 97). Press
r2~/oF1'J
to turn on the
camcorder.
• You can select the length of time until
shut-off or turn off the Quick Start
function with the [QUICK START] setting
(CO 97).
o
IMPORTANT
Do not disconnect the power source
during standby mode (while the
~
indicator is lit in orange).
(1)
NOTES
2
When you wish to resume
recording, open the LCD panel.
Within less than 1 second, the
IBm1
indicator will return to green and the .
camcorder will be ready to record.
Reviewing and Deleting the Last Scene
Recorded
Even in
I -" I
mode you can play back
the last scene recorded in order to
check it. You can also delete the scene
while reviewing it.
• Avoid any other operations on the
camcorder while the scene is being
deleted.
• You will not be able to delete the last
scene if after the scene was recorded
you changed the operating mode or
turned the camcorder off.
38