Image Level Selection - Sanyo PLC-XL45 Owner's Manual

Image Level Selection

Direct Operation
Select an image level from among Dynamic, Standard,
Cinema, Blackboard (Green), Image 1, Image 2, Image 3,
and Image 4 with the IMAGE button on the remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
For viewing the image projected on a blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 1–4
User preset image in the Image Adjust Menu (pp.38–39).
Menu Operation
1
Use the MENU button to display the On-Screen Menu.
Press the Point buttons to move the red frame
7 8
pointer to the Image Select Menu icon.
2
Use the Point buttons to move the red frame
ed
pointer to the desired level and then press the SELECT
button.
Dynamic
For viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard (Green)
For viewing the image projected on a Blackboard. See above
for further description.
Image1–4
User preset image in the Image Adjust Menu (pp.38–39).
Remote Control
Image Select Menu
The image level being selected.
http://www.pureglare.com.au
Video Input
IMAGE button
Dynamic
Standard
Cinema
IMAGE
button
Blackboard (Green)
Image 1
Image 
Image 
Image 4
Image Select
Menu icon
Move the red frame pointer to
the desired image level and press
the SELECT button.