Focus Adjustment; Keystone Correction; Http://Www.pureglare.com.au - Sanyo PLC-XL45 Owner's Manual

Basic Operation

Focus Adjustment

Adjust the lens focus with the focus lever.

Keystone Correction

If a projected picture has keystone distortion, correct the
image with the Keystone function.
Press the KEYSTONE button on the top control or on the
remote control. The keystone dialog box appears. Correct
keystone distortion with the Point
adjustment can be stored (p.41).
Reduce the upper width
with the Point
e

buttons. Keystone
ed
Reduce the lower width
button. with the Point

http://www.pureglare.com.au

Focus Lever
•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment is canceled.
•The adjustable range can be limited depending on the
input signal.
button.
d
•The projected picture may fluctuate momently
depending on the keystone adjustment.
•"Keystone" disappears after 4 seconds.
Top Control
POWER WARNING LAMP REPLACE
Remote Control
KEYSTONE
button
POINT ed buttons
KEYSTONE button
POINT ed buttons