Sanyo PLC-XL45 Owner's Manual page 48

Setting
Enter a PIN code
Select a number by pressing the Point
And then press the Point
and move the pointer. The number changes to "✳". If
you fixed an incorrect number, move the pointer to the
number you want to correct by pressing the Point
button, and then select the correct number by pressing
the Point buttons.
ed
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
button so that you can change the following PIN code
lock settings. If you entered an incorrect PIN code, "PIN
code" and the number (✳✳✳✳) turns red. Enter a correct
PIN code all over again.
Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red frame pointer to "Quit" with the Point
button. Press the SELECT button to close the dialog
d
box.
Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point
then press the Point
move the pointer. Repeat it to complete entering a four-
digit number. After entering the four-digit number, move
the pointer to "Set" by pressing the Point
press the SELECT button.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 4, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
4
buttons.
ed
button to fix the number
8
button. Press the SELECT
8
buttons and
7 8
button, and
d
buttons. And
ed
button to fix the number and
8
button. Then
8
http://www.pureglare.com.au
Enter a PIN code
7
Change the PIN code lock setting
Select a desired setting with the
Point
Change the PIN code
The input numbers change
to "✳" for security reasons.
Move the pointer to "Set" by
pressing the Point button.
8
And then press the SELECT
button.
7 8 buttons.
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The input numbers
are being displayed for
confirmation.