10. Carefully slide the Upright Crossbar (41)
10
between the Uprights (89, 90). Attach the Upright
Crossbar with the four 5/16" x 3/4" Screws (4)
that you removed in step 6 and four 5/16" Star
Washers (11). Start all four Screws, and then
tighten them.
41
4
4
11
11
89
90
11. Tighten the six 3/8" x 4" Screws (7). Then, press
11
the Base Covers (82, 83) into place.
82
7
83
7
14