Table of Contents
Advertisement
nordictrack.ca
Model No. 24887C.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to iconservice.ca.
CUSTOMER CARE
Call toll-free 1-888-936-4266
Mon.–Fri. 7:30 a.m.–4:30 p.m. ET
(excluding holidays)
or email us at
customerservice@iconcanada.ca
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Save this
manual for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for NordicTrack C 1070 PRO
Summary of Contents for NordicTrack C 1070 PRO
- Page 1 Model No. 24887C.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to iconservice.ca. CUSTOMER CARE Call toll-free 1-888-936-4266 Mon.–Fri.
-
Page 2: Table Of Contents
Note: The decals may not be shown at actual size. 305284 NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The BLUETOOTH word mark and logos are registered trademarks of Bluetooth SIG, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 19. Always stand on the foot rails when starting able to safely lift 45 lbs. (20 kg) to move the or stopping the walking belt. Always hold the treadmill. handrails while using the treadmill. 26. When folding or moving the treadmill, make 20.
-
Page 6: Before You Begin
Thank you for selecting the new NORDICTRACK reading this manual, please see the front cover of this ® C 1070 PRO treadmill. The C 1070 PRO treadmill manual. To help us assist you, note the product model provides an impressive selection of features designed number and serial number before contacting us. -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 8: Assembly
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you finish all assembly steps. - Page 9 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (80) to the front of the Base (88). Next, identify the Right Upright (79). Have a second person hold the Right Upright near the Base (88).
-
Page 10: The Screws
4. Set the Right Upright (79) on the Base (88) as shown. Make sure not to pinch the Upright Wire (80). Slide the Right Upright so that the 3/8" x 2 3/8" Screw (2) in the Base is inserted into the slot in the Right Upright. Do not tighten the Screw yet. -
Page 11: 5/16" X 3/4" Screws (13
6. Remove and save the four indicated 5/16" x 3/4" Screws (13). Identify the Left and Right Base Covers (86, 85). Slide the Left Base Cover onto the Left Upright (78), and slide the Right Base Cover onto the Right Upright (79). Do not press the Base Covers into place yet. -
Page 12: Attach The Trays To The Console Base (93) With
9. Set the Console Base (93) face down on a soft surface to avoid scratching the Console Base. Remove and discard the two indicated screws (F). Then, remove the Pulse Crossbar (75). Next, identify the Left and Right Trays (89, 90). Attach the Trays to the Console Base (93) with eight #8 x 1/2"... -
Page 13: The Screws
11. With the help of a second person, hold the con- sole assembly (G) near the Handrails (72). Connect the three ground wires (H) from the console assembly (G) to the three Console Ground Wires (76) on the Pulse Crossbar (75). Next, insert the Upright Wire (80) through the two indicated looped ties (O). -
Page 14: The Screws
13. Attach the Pulse Crossbar (75) to the console assembly (G) with four #8 x 3/4" Screws (11); start all four Screws, and then tighten them. Do not overtighten the Screws. Then, firmly tighten the four 5/16" x 3/4" Screws (13). 14. -
Page 15: 5/16" X 3/4" Screws (13
15. Raise the Frame (54) to the upright position. Have a second person hold the Frame until step 17 is completed. Remove the two 5/16" x 3/4" Screws (13) from the Latch Crossbar (51). Next, orient the Latch Crossbar (51) as shown. Make sure that the “This side toward belt”... -
Page 16: The Screws
17. Remove the 5/16" Nut (14) and the 5/16" x 2 1/4" Bolt (26) from the bracket on the Latch Crossbar (51). Align the upper end of the Storage Latch (52) with the bracket on the Latch Crossbar (51), and insert the 5/16"... -
Page 17: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit. - Page 18 CONSOLE DIAGRAM FEATURES OF THE CONSOLE In addition, the console features a selection of onboard workouts. Each workout automatically controls the The advanced treadmill console offers a selection of speed and incline of the treadmill as it guides you features designed to make your workouts more effec- through an effective exercise session.
- Page 19 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
- Page 20 HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before using the treadmill for the first time, set up the First, touch the profile button in the lower-right console. corner to select the settings main menu. Next, see step 2 on page 26 and select the maintenance 1.
- Page 21 HOW TO USE THE MANUAL MODE 4. Change the incline of the treadmill as desired. 1. Insert the key into the console. To change the incline of the treadmill, press the incline increase and decrease buttons or one of the See HOW TO TURN ON THE POWER on page numbered incline buttons.
- Page 22 To measure your heart rate, stand on the foot • Your pace rails and hold the contacts with your palms for • The speed of the walking belt approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart rate will be shown.
- Page 23 HOW TO USE A MAP WORKOUT OR AN ONBOARD 5. Monitor your progress with the display modes. WORKOUT See step 5 on page 21. 1. Insert the key into the console. 6. Measure your heart rate if desired. See HOW TO TURN ON THE POWER on page 19.
- Page 24 4. Save your workout. HOW TO USE A DISTANCE OR TIME WORKOUT Touch the Save New Workout button in the lower- Note: To use a distance or time workout, you must left corner of the screen. If desired, change the title have access to a wireless network (see HOW TO USE of the workout or add a description, and then press THE WIRELESS NETWORK MODE on page 27).
- Page 25 5. Select a distance or time workout that you have HOW TO USE THE WORKOUT SETTINGS SECTION previously added to your schedule on iFit.com. 1. Select the settings main menu. Touch the calendar icon to download a distance or time workout from your schedule. Insert the key into the console (see HOW TO TURN ON THE POWER on page 19).
- Page 26 HOW TO USE THE EQUIPMENT SETTINGS HOW TO USE THE MAINTENANCE SECTION SECTION 1. Select the settings main menu. 1. Select the settings main menu. See step 1 on page 25. See step 1 on page 25. 2. Select the maintenance section. 2.
- Page 27 4. Calibrate the incline system of the treadmill. HOW TO USE THE WIRELESS NETWORK MODE Touch the Calibrate Incline button. Then, touch the The console features a wireless network mode that Begin button to calibrate the incline system. The allows you to set up a wireless network connection. treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, 1.
- Page 28 HOW TO CONNECT AN HDMI CABLE When the console is connected to your wireless network, a checkmark will appear next to the wire- less network name. Then, touch the back button on To show your console screen on a TV or monitor, plug the screen to return to the wireless network mode.
- Page 29 HOW TO ADJUST THE CUSHIONING SYSTEM THE OPTIONAL CHEST HEART RATE MONITOR The treadmill features a cushioning system that Whether your reduces the impact as you walk or run on the treadmill. goal is to burn fat or to Remove the key from the console and unplug the strengthen your power cord.
-
Page 30: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left. -
Page 31: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE b. After the power cord has been plugged in, make sure that the key is inserted into the console. Regular maintenance is important for optimal per- formance and to reduce wear. Inspect and properly c. Check the power switch located on the treadmill tighten all parts each time the treadmill is used. - Page 32 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless a. Calibrate the incline system (see step 4 on page 27). instructed to do so by an authorized service SYMPTOM: The walking belt slows when walked on representative.
- Page 33 SYMPTOM: The walking belt slips when walked on SYMPTOM: The tablet holder does not stay in place a. First, remove the key and UNPLUG THE POWER a. Rotate the tablet holder backwards. Then, tighten CORD. Using the hex key, turn both idler roller the indicated screw slightly until the tablet holder screws clockwise, 1/4 of a turn.
-
Page 34: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 35: Part List
PART LIST Model No. 24887C.0 R0917A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Latch Crossbar 3/8" x 2 3/8" Screw Storage Latch 3/8" x 1 1/2" Screw Motor Belt 3/8" x 1 1/4" Screw Frame 5/16"... -
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. 24887C.0 R0917A... - Page 37 EXPLODED DRAWING B Model No. 24887C.0 R0917A...
- Page 38 EXPLODED DRAWING C Model No. 24887C.0 R0917A 98 36...
- Page 39 EXPLODED DRAWING D Model No. 24887C.0 R0917A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...