NordicTrack C 970 Pro Treadmill Manual page 13

8. Insert the wires into the Right Upright (90) as
you set the console assembly on the Left and
Right Uprights (89, 90). Be careful not to pinch
the Upright Wire (81).
Attach the console assembly with four 5/16" x
1 1/2" Screws (87) and four 5/16" Star Washers
(11). Start all four Screws, and then tighten
them.
9. Identify the Left Handrail (86). Slide the Left
Handrail between the console assembly and the
pulse assembly.
Attach the Left Handrail (86) with two 5/16" x 2"
Screws (31), a 5/16" x 3 3/4" Screw (28), and
three 5/16" Star Washers (11) as shown. Start
all three Screws, and then tighten them.
Attach the Right Handrail (not shown) to the
console assembly in the same way.
8
Console
Assembly
87
11
89
9
Console
Assembly
11
31
13
87
11
90
Pulse
Assembly
86
11
31
28
81