Installation; General; Power Connections; Wall Mounting - Motorola MOSCAD-M Owner's Manual

INSTALLATION

General

MOSCAD-M SAFETY SUMMARY
The MOSCAD-M should be installed by qualified and authorized
technicians. If the installation involves high-voltage connections,
technicians must be specifically qualified to handle high voltage.
This equipment was tested with cables 3 meters in length. If longer
cables and/or cabinets are used, the installer is responsible for making
sure that the installation complies with the requirements of the relevant
standard.
The product is a radio accessory. The installer must make sure that the
radio connected to the system has all required approvals and that the
installation meets the requirements of the standard. This equipment is a
base station unit and complies with the FCC base station requirements.
The antenna must be installed outdoors.

Power Connections:

This device accepts 9-30V DC input, maximum 2.5A @15V DC.
This chapter covers the following installation procedures:
•

Wall mounting

•
Connections
•
Backup Batteries
•
Miscellaneous
Wall Mounting
The dimensions of the unit are: width – 21.5 cm (8.46"), height – 18.5 cm (7.28"), depth – .85
cm (.33"), weight – 1.5kg maximum (see Figure 2).
3