Table 4-8 Wlan Quick Connect - Lantronix xPico WiFi User Manual

WLAN Quick Connect
Settings
Network Name (search field)
Scan "<network SSID>"
Network Name (link)
BSSID
CH
RSSI
Security Suite
xPico® Wi-Fi® Embedded Device Server User Guide

Table 4-8 WLAN Quick Connect

Description
Enter a network name and click Scan to search for a network.
Perform a scan for devices within range of the xPico Wi-Fi. Including the
optional network SSID limits the scan to devices configured with the
specified network SSID. Omitting the network SSID performs a scan for all
devices in range.
Lists the SSID of a network. Click a specific Network Name to display the
Quick Connect profile. If you provide the Password for a specific Quick
Connect Profile, you can add that profile to your list of
to four WLAN profiles may be added, and only one may be connected at
any given time.
Lists the basic service set identifier. This is a unique 48-bits address that
identifies the access point that creates the wireless network.
Provides the channel number of a network.
Displays an instantaneous value indicating the signal strength of the
network. The best to worst signal strength is indicated by green, yellow and
red respectively.
Note: RSSI reported in scan results is a single sampling.
Lists the security suite of a network (e.g., WEP, WPA, WPA2).
4: Network Settings
WLAN Profiles. Up
25