9: Updating Firmware; Obtaining Firmware; Loading New Firmware Through Web Manager; Figure 9-1 Uploading New Firmware - Lantronix xPico WiFi User Manual

9: Updating Firmware

Obtaining Firmware

Obtain the most up-to-date firmware and release notes for the unit from the Lantronix Web site
(www.lantronix.com/support/downloads/) or by using anonymous FTP (ftp://ftp.lantronix.com/).

Loading New Firmware through Web Manager

Upload the firmware using the device web manager System page.
To upload new firmware:
1. Select System in the menu bar. The System page appears.
Note: See
System Settings (on page 34)
debice.
2. Click Firmware Upload (under the Upload New Firmware heading) to browse to the
firmware file.
3. Click OK to confirm uploading a new firmware image. A few moments will pass as the
firmware upload is prepared.
4. Click Choose File to select the file and click Open.
5. Click Upgrade to install the firmware on the xPico Wi-Fi embedded device server.
xPico® Wi-Fi® Embedded Device Server User Guide
for options to restore factory defaults or reboot the

Figure 9-1 Uploading New Firmware

37