System Management; To Reboot Or Restore Factory Defaults; Admin User; To Configure Admin User On The Device - Lantronix xPico WiFi User Manual

System Management

System Settings
Reboot (button)
Factory Defaults (button)
Firmware Upload (button) Device will reboot to the Over-The-Air (OTA) firmware upgrade application to
Note: Go to Chapter 9: Updating Firmware

To Reboot or Restore Factory Defaults

Using Web Manager
To access the area with options to reboot, restore to factory defaults, upload new firmware,

click System in the menu and select Management.
Using XML via CLI
Not applicable.


Admin User

System Settings
Password

To Configure Admin User on the Device

Using Web Manager
To access the area with options to reboot, restore to factory defaults, upload new firmware,

click System in the menu and select Admin User.
Using XML via CLI
Look for the status header:

xPico® Wi-Fi® Embedded Device Server User Guide

Table 7-2 Management Settings

Description
Reboots the device. When rebooted, your browser should be refreshed and
redirected to the main status page after 30 seconds.
Note: The redirect will not work as expected if the IP address of the devices
changes after reboot. After setting the configuration back to the factory
defaults, the device will automatically be rebooted. If web manager is access
through SoftAP, your connection to SofAP may be dropped when device
reboots.
Restores the device to the original factory settings. All configuration will be
lost. The xPico Wi-Fi automatically reboots upon setting back to the defaults.
continue the operation.
for directions on uploading new firmware.

Table 7-3 Admin User Settings

Description
Enter a new password and click Submit. Users will need to log in again after
changing the password.
<configgroup name = "Users" instance="admin">
7: Maintenance and Diagnostics Settings
35