Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha TENERE XT660Z Owner's Manual

CAUTION:
Do not overtighten the screw, oth-
erwise the lens may break.
PERIODIC MAINTENANCE AND MINOR REPAIR
ECA11190
Replacing the license plate
light bulb
1. Bulb socket
2. License plate light bulb
1. Remove the socket (together with
the bulb) by pulling it out.
2. Remove the defective bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in.
EAUM2200
Replacing an auxiliary light
bulb
1. Auxiliary light socket
2. Auxiliary light bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove panel G. (See page 6-7.)
2. Remove the auxiliary light socket (to-
3. Remove the burnt out bulb by
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket
6. Install the panel.
6-35
gether with the bulb) by pulling it out.
pulling it out.
(together with the bulb) by push-
ing it in.
EAU42651
1
2
3
4
5
6
7
8
9
10