Removing And Installing The Cowling And Panels - Yamaha TENERE XT660Z Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing the
cowling and panels
1
The cowling and panels shown need
to be removed to perform some of the
maintenance jobs described in this
2
chapter. Refer to this section each
time the cowling or a panel needs to
3
be removed and installed.
4
Panel A and B
5
6
7
8
9
1. Panel mounting bolt
A. Right panel
B. Left panel
10
To remove one of the panels
Remove the bolts, and then pull the
panel off at the areas shown.
EAU18722
1. Panel
EAUB1540
2. Turn signal light coupler
3. Pin
To install the panel
Place the panel in the original position,
and then install the bolts.
Panel C and D
1. Panel mounting bolt
C. Right panel
D. Left panel
To remove one of the panels
Remove the bolts, and then pull the
panel off at the areas shown.
To install the panel
Place the panel in the original position,
and then install the bolts.
6-6