Yamaha TENERE XT660Z Owner's Manual page 55

Hide thumbs Also See for TENERE XT660Z:
Table of Contents

Advertisement

NOTE:
The coolant should be between the
minimum and maximum level marks.
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
4. Reservoir cap
3. If the coolant is at or below the
minimum level mark, remove pan-
el E (See page 6-7.), remove the
reservoir cap, add coolant to the
maximum level mark, and then in-
stall the reservoir cap and the
panel.
Coolant reservoir capacity:
0.50 L (0.52 US qt) (0.44 Imp.qt)
PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
● If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
● If water has been used instead
of coolant, replace it with
coolant as soon as possible,
otherwise the cooling system
will not be protected against
frost and corrosion.
● If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possi-
ble, otherwise the effective-
ness of the coolant will be re-
duced.
6-13
ECA10471
WARNING
0
Never attempt to remove the radia-
tor cap when the engine is hot.
NOTE:
The radiator fan is automatically
switched on or off according to
the coolant temperature in the ra-
diator.
If the engine overheats, see page
3-4 for further instructions.
Changing the coolant
WARNING
0
Never attempt to remove the radia-
tor cap when the engine is hot.
The coolant must be changed at the
intervals specified in the periodic
maintenance and lubrication chart.
Have a Yamaha dealer change the
coolant.
EWA10380
1
2
3
4
5
EAU33030
6
EWA10380
7
8
9
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents