Front Fork Setting Parts; Rear Suspension Setting; Choosing Set Length - Yamaha YZ125(V) Owner's Service Manual

Hide thumbs Also See for YZ125(V):

Table of Contents

Front fork setting parts

9 Front fork spring 1

The I.D. mark (slits) a is proved on the end of

The rear suspension setting should be made

depending on the rider's feeling of an actual run

and the circuit conditions.

The rear suspension setting includes the follow-

ing two factors:

1. Setting of spring preload

9 Change the set length of the spring.

9 Change the spring.

2. Setting of damping force

9 Change the rebound damping.

9 Change the compression damping.

1. Place a stand or block under the engine to

put the rear wheel above the floor, and mea-

sure the length a between the rear wheel

axle center and the rear fender holding bolt.

1C3-23141-A0

1C3-23141-N0

1C3-23141-C0

1C3-23141-D0

1C3-23141-E0

1C3-23141-F0

1C3-23141-G0

1C3-23141-H0

1C3-23141-J0

Show Quick Links

Table of Contents