Yamaha YZ125(V) Owner's Service Manual page 118

J Clamp the CDI magneto lead,
radiator breather hose and
YPVS breather hose to the
frame.
K Clamp to the frame the CDI
magneto lead and radiator
breather hose. Take care to
clamp them above the projec-
tion on the frame.
L Locate the clamp ends in the
arrowed range.
M Pass the air vent hose, over-
flow hose and
breather hose so that they do
not contact the rear shock
absorber.
N Bring the connector cover into
contact with the coupler.
CABLE ROUTING DIAGRAM
crankcase
2-14
SPEC