Channel Settings; Auto Installation; Programme Setup - Sharp LC-52XS1E Operation Manual

Basic adjustment

Channel Settings

Auto Installation

Setup
Auto Installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital, satellite and
analogue individually and reconfigure the settings after
the initial auto installation has been completed.
1
Press c/d to select "Yes", and then press OK.
2
Press a/b/c/d to select the desired
language, and then press OK.
• You cannot set the Home/Store setting and the country
setting in "Auto Installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.
• The current country setting is displayed on the screen.
3
Press a/b to select the broadcast standard
you want to search, and then press OK.
E
Digital Search
After selecting the service you want to search,
either "Terrestrial" or "Cable", refer to "Digital
Search" setting on pages 11–13.
NOTE
• The "Digital Search" has a "Reset" function. This function
allows you to reset all setting values.
E
Analogue Search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to "Analogue
Search" setting on page 13.
E
Satellite Search
After selecting "Satellite Search", the current
DVB-S setting screen is displayed. Refer to the
"Satellite Search" setting on pages 14–15.
NOTE
• After selecting "Next" in the DVB-S setting screen, you
need to select your preferred satellite broadcast to start
searching.
• The "Satellite Search" has a "Reset" function. This allows
you to reset all setting values.
34

Programme Setup

Setup
Programme Setup
You can reconfigure each service setting automatically
or manually.
Press a/b to select the broadcast standard
you want to reconfigure, and then press OK.
Digital Setting
Satellite Setting
Analogue Setting
Digital Setting
E
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
E
Manual Search
Add new services within a specified frequency band.
• Enter the frequency using the 0–9 numeric buttons.
• You can perform "Manual Search" with a service number
only when the five Nordic countries have been selected in
the country setting.
E
Manual Adjust
Configure various settings for each service using the
Colour (R, G, B) buttons.
Service Service
No. Name
DTV 993 SIT 3
DTV 994 SIT 2
DTV 995 SIT 1
DTV 999 HD Monosco
: Lock : CH Skip
R G
1
Press a/b to select the desired service.
2
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
The ✔ mark indicates the operation is set to on. Each
•
time the colour button is pressed, you can switch the
corresponding operation on/off.
Old
CH
Lock
LCN
Skip
✔
✔
: Sort
B