Watching Tv; Daily Operation; Switching On/Off; Switching Between Digital, Satellite And Analogue Broadcasts - Sharp LC-52XS1E Operation Manual

Watching TV

Daily operation

Switching on/off

Turning on/off the main power
Press a on the Display.
Switch it off by pressing a on the Display.
Standby mode
E
To standby mode
If the TV is switched on, you can switch it to standby
by pressing TV B on the remote control unit or B
on the AVC System.
E
Switching on from standby
From standby, press TV B on the remote control unit
or B on the AVC System.
B indicator status (Display/AVC System)
B indicator
Off Power off
Blue Power on
Red Standby
NOTE
• If you are not going to use this TV for a long period of time, be sure
to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when a is
•
turned off.
Switching between digital, satellite
and analogue broadcasts
E
Watching digital
broadcasts
E
Watching analogue
broadcasts
NOTE
• When turning off the main power
using a on the Display, EPG data
will be lost, and programmed timer
recordings will not be performed
by the TV.
Status
E
Watching satellite
broadcasts

Changing channels

With Pr/s:

Selecting an external video source

Once the connection is made, press
b to display the "INPUT SOURCE"
screen, and then press a/b to
switch over to the appropriate
external source with OK.

Selecting a sound mode

E
DTV/SAT mode:
If multi sound modes are received, each time you press 2
the mode switches as follows.
Audio (ENG) : STEREO
L/R
Audio (ENG) : CH A
CH A
Audio (ENG) : MONO
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R L
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received broadcasts.
E
ATV mode:
Each time you press 2, the mode switches as shown in
the following tables.
NICAM TV broadcasts selection
Signal Selectable items
NICAM STEREO, MONO
Stereo
Bilingual NICAM CH A, NICAM CH B, NICAM CH AB, MONO
NICAM MONO, MONO
Monaural
A2 TV broadcasts selection
Signal Selectable items
STEREO, MONO
Stereo
Bilingual CH A, CH B, CH AB
MONO
Monaural
NOTE
• When no signal is input, the sound mode will display "MONO".
With 0–9:
INPUT SOURCE
TV
EXT1
EXT2
EXT3
EXT4
HDMI1
L R LR
CH B CH AB
R LR
17