Channel Settings; Digital Setting - Sharp LC-60LE830X Operation Manual

Basic adjustment

Channel settings

Go to "Menu" > "Setup" > "View setting".
CH list
:Enter :Back
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting and reconfigure the settings
after the initial auto installation has been completed.
1
Go to "Menu" > "Setup" > "View setting" > "Auto
installation".
2
If you have already set the password, enter it here.
• See page 37 for setting a password.
3
Press c/d to select "Yes", and then press
A.
4
Press a/b to select the desired language, and
then press A.
• You do not need to do anything during the auto search.
5
Press a/b to select "Digital search" or "Analogue
search", and then press A.
• When the country setting is set to "Australia", only
"Digital search" is available.
NOTE
• You cannot set the Home/Store setting and the country
setting in "Auto installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.
• The current country setting is displayed on the screen.
View setting
Programme setup
You can run the auto search procedure again at any time
by accessing the "Setup" menu and "Programme setup".
Channels can be tuned automatically or manually.

Digital setting

You can reconfigure the DTV channel settings
automatically or manually.
1
Go to "Menu" > "Setup" > "View setting" >
"Channel settings" > "Programme setup".
2
If you have already set the password, enter it here.
• See page 37 for setting a password.
Menu
Setup
View setting
Auto installation
Channel settings
Quick start
Individual setting
3
The "Digital setting" screen displays, and then
press A.
4
Press a/b to select the desired menu item, and
then press A.
5
Press c/d to select "Yes", and then press
A.
Additional search
Use this menu to add new services automatically after
"Auto installation" has been completed.
• Start searching channels after selecting the colour system
and sound system.
Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0–9 numeric buttons.
Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service Service
no. name
Lock CH skip
1
Press a/b to select the desired service.
2
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
Buttons for "Manual adjust" operation
Lock Press R button.
When the service is locked, you must enter your password
whenever you tune to the service.
CH skip Press G button.
Services with a ✔ mark are passed over when pressing
!r/s on the TV or remote control unit.
Delete Press Y button.
The selected service is deleted. If you want to watch the
service you deleted once again, perform "Auto installation",
"Additional search", or "Manual search".
Sort Press B button.
The item position of services can be sorted.
Press a/b to select the service whose item position
1
you want to move, and then press A.
Press a/b to move it to the desired position, and then
2
press A.
3
Repeat steps 1 and 2 until all desired service items are
sorted.
Lock CH skip Old LCN
Delete Sort
35