Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Sharp LC-32LB261U User Manual

Playing TV audio only

You can turn off the picture on your TV and listen to the
program audio only.
1 Press MENU,
2 Press or to highlight
Channels, then press ENTER.
3 Press or to highlight Audio Only, then press ENTER or
to access the option.
4 Press or to select On.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
Changing channel
settings

Automatically scanning for channels

When you scan for channels, your TV searches for channels
with signals and stores the channel information in the channel
list. When you press CH
or previous channel in the channel list.
If the TV signal source changes, for example you change from
an outdoor antenna to cable TV (no box), you need to scan for
channels.
1 Press MENU.
2 Press or to highlight
Channels, then press ENTER.
3 Press or to highlight Auto Channel Search, then press
ENTER.
LC-32LB261U Sharp 32" LED TV
or CH , your TV goes to the next
55