Channel Settings - Sharp AQUOS LC-32LE700S Operation Manual

Basic adjustment

Channel settings

Auto installation
Setup
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
Press c/d to select "Yes", and then press
1
;.
Press a/b/c/d to select the desired
2
language, and then press ;.
NOTE
• PIN input is required when executing "Auto installation". The
default PIN is "1234". To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
• You cannot set the Home/Store setting and the country
setting in "Auto installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.
• The current country setting is displayed on the screen.
Press a/b to select the broadcast standard
3
you want to search, and then press ;.
E
Digital search
After selecting the service you want to search,
either "Terrestrial" or "Cable", refer to Digital
broadcast setting on pages 9_10.
• The "Digital search" has a "Reset" function. This function
allows you to reset all setting values.
E
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 10.
Programme setup
Setup
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing "Programme setup".
The default PIN is "1234". To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
Digital setting
E
Additional search
Use this menu to add new services automatically after
"Digital search" in the "Auto installation" menu has been
completed.
E
Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform "Manual search" with a service number only
when the five Nordic countries have been selected in the
country setting.
27