Sharp LC-52XS1E Operation Manual page 37

Basic adjustment
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN
whenever you tune to the service.
CH Skip: Press G button.
Services with a ✔ mark are passed over when pressing
Pr/s on the Display or remote control unit.
Sort: Press B button.
The item position of services can be sorted.
1 Press a/b to select the service whose item
position you want to move, and then press OK.
DTV 994 SIT 2
DTV 995 SIT 1
2 Press a/b to move it to the desired position,
and then press OK.
DTV 994 SIT 1
DTV 995 SIT 2
3
Repeat steps 1 and 2 until all desired service
items are sorted.
Cable Setting
E
Additional Search
Use this menu to add new services automatically after
auto installation has been completed. Follow steps 1
to 5 in the right column on page 12.
E
Manual Search
Add new services within a specified frequency band.
After setting the items on the following screen, the TV
starts searching.
• Refer to the table about menu items in the left column on
page 13.
Frequency [47.0]
Symbol rate [6900]
QAM Modulation [64]
Search start
E
Manual Adjust
This function is the same as in "Digital Setting". Refer
to "Manual Adjust" in "Digital Setting".
✔
✔
✔
✔
47.0 MHz
Satellite Setting
Before selecting the type of search in "Satellite
Setting", you need to select the satellite broadcast.
SAT1 [ASTRA 1]
SAT2 [Hot Bird 13E]
4 SAT3 [None]
SAT4 [Turksat]
E
Additional Search
Use this menu to add new services automatically after
auto installation has been completed. Follow steps 1
to 6 in the right column on page 14.
E
Manual Search
Add new services within a specified frequency band.
After setting the items on the following screen, select
"Yes" from "Search start" menu.
Band [Vert/Low]
Frequency [9944]
Symbol rate [27500]
Search start
E
Manual Adjust
This function is the same as in "Digital Setting". Refer
to "Manual Adjust" in "Digital Setting".
Vert/Low
Vert/High
Horiz/Low
Horiz/High
35