Inserting A Ca Card - Sharp LC-52XS1E Operation Manual

Connecting external devices

Inserting a CA Card

In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the AVC System (See below).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
1
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider's logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
2
Carefully insert the CI Module in the CI slot
with the contact side forward. The logo on the
CI Module must be facing upward. Do not use
excessive force. Make sure the module is not
bent in the process.
26
Checking CI Module information
NOTE
• Make sure that the CI Module is properly inserted.
• This menu is only available for digital stations.
1
Press MENU and the "MENU" screen displays.
2
Press c/d to select "Digital Setup".
3
Press a/b to select "CI Menu", and then press
OK.
• The content of this menu depends on the provider of
the CI Module.
E
Module
General information on CI Module displays.
E
Menu
Adjustment parameters of each CA Card displays.
E
Enquiry
You can input numerical values such as passwords
here.
NOTE
• The content of each screen depends on the provider of
the CI Module.
Removing the CI Module
1
Remove the CI slot cover.
2
Press the EJECT
button to pop out
the CI module
from the CI slot.
Selecting CI slot
The AVC System has two CI slots. You should select
which CI slot is used for each broadcast standard.
1
Press MENU and the "MENU" screen displays.
2
Press c/d to select "Digital Setup".
3 Press a/b to select "CI Select", and then press
OK.
4 Press a/b to select the broadcast standard
(DTV or SAT1, etc), and then press OK.
DTV
SAT1
SAT2
SAT3
SAT4
5
Press c/d to select "CI 1" or "CI 2", and then
press OK.
CI 1 CI 2