Sharp LC-52XS1E Operation Manual page 15

Quick guide
Menu Description
Specifies if you
Scrambled
need to add pay-TV
Stations
services.
Search Specifies how you
Method search channels.
Start
—————————
frequency
Specifies the network.
Set this to register only
Network ID the specified network
ID without registering
any special services.
The symbol rates are
Symbol rate specified by the cable
1* provider. Input the value
received for CATV.
The symbol rates are
Symbol rate specified by the cable
provider. Input the value
2*
received for CATV.
QAM
—————————
Modulation 1
QAM
—————————
Modulation 2
* Set up "Symbol rate 2" if the cable provider uses several
symbol rates.
Selectable Item
"Analogue Search" setting
Yes, No
Channel: Extracts
all of information
from a channel
(quick, but needs
corresponding TV
stations).
Frequency:
Checks every
frequency in range
(slow).
47.0–858.0 MHz
None, 0–65535
NOTE
•
1000–9000
•
1000–9000
16, 32, 64, 128,
256
None, 16, 32, 64,
128, 256
01 628.25 02 693.25 03 767.25
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress, press
6.
After searching for analogue channels, the
screen switches to the "Satellite Search" setting
(Page 14).
If you turn off the main power on the Display while
performing "Analogue Search", the initial auto installation
wizard will not appear. The auto installation function allows
you to execute the installation again from the "Setup" menu
(Page 34).
The initial auto installation wizard will turn off if you leave
the TV unattended for 30 minutes before searching for
channels.
04 831.25
13