Channel Settings - Sharp AQUOS LC-40LE924E Operation Manual

Basic adjustment

Channel settings

CH list
:Enter :Back
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital, satellite and
analogue individually and reconfigure the settings after
the initial auto installation has been completed.
1
Go to "Menu" > "Setup" > "View setting" >
"Auto installation".
2
Press c/d to select "Yes", and then press
;.
3
Press a/b/c/d to select the desired
language, and then press ;.
NOTE
• PIN input is required when executing "Auto installation". The
default PIN is "1234". To change the PIN setting, refer to
Password/Lock settings (Page 37). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN (Page 59).
• You cannot set the Home/Store setting and the country
setting in "Auto installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.
• The current country setting is displayed on the screen.
4
Press a/b to select the broadcast standard
you want to search, and then press ;.
34
Menu
Setup
View setting
Auto installation
Channel settings
Quick start
Individual setting
Digital search
E
After selecting the service you want to search,
either "Terrestrial" or "Cable", refer to Digital
broadcast setting on pages 13_14.
Analogue search
E
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 14.
Satellite search
E
After selecting "Satellite search", the current
DVB-S/S2 setting screen is displayed. Refer
to the "Satellite search" setting on pages 15_16.
NOTE
• After selecting "Next" in the DVB-S/S2 setting screen, you need
to select your preferred satellite broadcast to start searching.
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
1
Go to "Menu" > "Setup" > "View setting" >
"Channel settings" > "Programme setup".
2
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing "Programme setup".
The default PIN is "1234". To change the PIN setting, refer to
Password/Lock settings (Page 37). To clear the PIN setting
(PIN input will no longer be needed), refer to CLEARING THE
PIN (Page 59).
Digital setting
Terrestrial
You can reconfigure the following settings when you
select "Terrestrial" in the initial auto installation or the
"Auto installation" menu.
Additional search
E
Use this menu to add new services automatically after
"Digital search" in the "Auto installation" menu has been
completed.
Manual search
E
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform "Manual search" with a service number only
when the five Nordic countries have been selected in the
country setting.