10/11/05 11:29:31 32KYJE00_105
WHEEL REMOVAL
Refer to the Safety Precautions on page
This motorcycle is equipped with a side
stand only. Therefore, if front or rear wheel
removal is required, it will be necessary to
raise the center of the motorcycle with a
jack or other firm support. If none is
available, see your dealer for this service.
(CBR250RA only)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
Front Wheel Removal
1.
Support the motorcycle securely and
raise the front wheel off the ground using
a safety stand or a hoist.
2.
Remove the front axle nut ( ).
3.
Loosen the axle pinch bolt ( ).
4.
Remove the front axle shaft ( ), front
wheel and side collar.
69
.
(1) Front axle nut
1
2
3
(2) Axle pinch bolt
(3) Front axle shaft
(1)
(3)
(2)
95