Preparation; Starting Procedure - Honda CBR250R Owner's Manual

10/11/05 11:25:40 32KYJE00_067

Preparation

Before starting, insert the key, turn the
ignition switch ON and confirm the
following:
The transmission is in neutral
(neutral indicator is ON).
The engine stop switch is at
The ABS indicator is ON.
The PGM-FI malfunction indicator lamp
(MIL) is OFF.
CBR250RA
The ABS indicator should go off after you
ride the motorcycle at a speed above 10
km/h (6 mph).

Starting Procedure

This motorcycle has a fuel-injected engine
with an automatic choke. Follow the
procedure indicated below.
Any Air Temperature:
(RUN). With the throttle completely closed, press
(CBR250RA). the start button.
The engine will not start if the throttle is
fully open (because the electronic control
module cuts off the fuel supply).
57