Abs Indicator - Honda CBR250R Owner's Manual

10/11/05 11:26:12 32KYJE00_074

ABS Indicator

CBR250RA
Normally, this indicator comes on when the
ignition is turned ON, and goes off after you
ride the motorcycle at speed above 10 km/h
(6 mph). If there is an ABS problem, the
indicator flashes and remains on. The ABS
system does not operate when the ABS
indicator is on.
If the ABS indicator comes on while riding,
stop the motorcycle in a safe place and turn
off the engine.
Turn the ignition ON again. The indicator
should come on, and go off after you ride
the motorcycle at speeds above 10 km/h (6
mph). If it does not go off, ABS is not
functioning, but the brakes still work a
Combined Brake System and provide
normal stopping ability. However, you
should have the system checked by your
dealer as soon as possible.
64
The ABS indicator may flash if you turn the
rear wheel while the motorcycle is upright
on the stand. This is normal. Turn the
ignition OFF, then turn it ON. The indicator
should come on, then go off after you run
the motorcycle above 30 km/h (19 mph).