Honda CBR250R Owner's Manual page 101

Hide thumbs Also See for CBR250R:
Table of Contents

Advertisement

10/11/05 11:29:09 32KYJE00_101
Lubrication and Cleaning:
Lubricate every 1,000 km (600 miles) or
sooner if chain appears dry.
After inspecting the slack, clean the chain
and sprockets while rotating the rear wheel.
Use dry cloth with chain cleaner designed
specifically for O-ring chains, or neutral
detergent. Use a soft brush if the chain is
dirty.
After cleaning, wipe dry and lubricate with
drive chain lubricant designed specifically
for O-ring chains. If not available, use SAE
80 or 90 gear oil.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such
as gasoline and benzene, abrasive cleaner,
chain cleaner or lubricant not designed
specifically for O-ring chains as these can
damage the rubber O-ring seals.
Avoid getting lubricant on the brakes or
tyres. Avoid applying excess chain lubricant
to prevent spray onto your clothes and the
motorcycle.
91

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbr250ra

Table of Contents